RECORDING
1.Slide open the lens cover to turn on power and enter the Record Mode.
•Sliding open the lens cover part way initially causes the flash to pop up.
Sliding it the rest of the way open turns on camera power and allows the lens to extend from the camera body. Be sure to slide the lens cover open as far as it will go.
•To change to the Playback Mode, press PLAY ON/ OFF.
1.Taking care you do not press it against the lens, gently slide the lens cover in the direction that shuts it.
•This starts a shutdown operation during which the fol- lowing procedures are performed.
a.The monitor screen turns off and the operation lamp starts to flash.
b.The lens retracts into the camera body.
c.After the lens completely retracts, the lens cover slides the rest of the way closed.
d.After the lens cover closes, the flash unit retracts into camera body.
e.The operation lamp stops flashing when the shut- down operation is complete.
IMPORTANT!
Never open the battery compartment cover, unplug the AC adaptor, or open the memory card slot cover while the operation lamp is flashing.