CONNECTING TO OTHER EQUIPMENT

Connecting to a Computer

 

System Requirements

 

The following accessories are included with the camera to make it easy for you to connect to a computer to transfer and manage your images.

•USB cable

•USB driver software (on CD-ROM)

•Data Transfer Cable

•Photo Loader application (on CD-ROM)

USB Port Connections

The camera’s USB port and accessories make it easy to connect to a computer equipped with a USB port. First install the USB driver software that comes bundled with the camera on your computer, and then use its special USB cable to make the connection. Once connected, you can view images on your computer's display and store images on its hard disk.

•See the separate installation manual for information about how to install the driver software on your computer.

Windows

•IBM PC/AT or compatible computer pre-installed with Windows 98

•486 or higher CPU (Pentium recommended)

•CD-ROM drive (for instal- lation)

•Keyboard and mouse or equivalent input device

•Available USB port

*Proper operation is not guar- anteed under the following conditions.

•A computer that has been updated from Windows 95 to Windows 98

*This USB driver does not run under Windows 3.1, Win- dows 95 or Windows NT.

Macintosh

•Mac OS 8.5 or higher, Mac OS 8.1 with USB system extentions (iMac update 1.0 is required)

•Power PC G3

•CD-ROM drive (for instal- lation)

•Keyboard and mouse or equivalent input device

•Available USB port

*The USB driver may not run correctly under certain hard- ware configurations.

E-96