POWER SUPPLY
•Always be sure to use the
• When unplugging the AC adaptor from the wall
CAUTION socket, be sure to grasp the adaptor (not the cord).
•Avoid any undue bending, pulling, and twisting of the AC adaptor’s cord, and never try to lengthen the cord by splicing it with other wire.
•Be sure to turn power off before connecting or disconnect- ing the adaptor.
•Always turn camera power off before disconnecting the AC adaptor, even if the camera has batteries installed. If you don’t, the camera will turn off automatically when you dis- connect the AC adaptor. You also run the risk of damaging the camera whenever you disconnect the AC adaptor with- out first turning power off.
•The AC adaptor may become warm to the touch after ex- tended periods of use. This is normal and is not cause for alarm.
•After using the camera, turn it off and unplug the adaptor from the AC outlet.
•The camera automatically switches over to AC adaptor powered operation whenever the AC adaptor is plugged into the camera.
•Always use the AC adaptor to power the camera whenever it is connected to a computer.
The settings described below let you specify sleep and auto power off trigger times that help to conserve valuable battery power.
SLEEP .................. The monitor screen enters a sleep state
if no operation is performed for a specified amount of time in the Record Mode. Pressing any button restores full power. You can specify 30 seconds, 1 minute, or 2 minutes before the sleep state is triggered, or you can turn off this setting entirely.
AUTO
POWER OFF ........ Auto Power Off turns off camera power if
no operation is performed for a specified amount of time. You can specify 2 min- utes, or 5 minutes before AUTO POWER OFF is triggered.
•AUTO POWER OFF takes priority when both SLEEP and AUTO POWER OFF are both set for a