OTHER SETTINGS

Configuring Power Down Image Settings

With the power down image feature, you can configure the camera so a specific image stored in camera image memory appears whenever you turn off power. You can specify a snapshot or a movie as the power down image.

■To configure power down image settings

1.Use the USB cable to connect the camera to your computer (page 162).

2.Move the image data that you want to use for the power down image to the top (root) folder of the camera’s built-in Flash memory.

•The file name extension will not be displayed if your computer is configured to hide file name extensions.

Example: CIMG0001

•If your power down image is stored on a memory card, be sure to copy the image to built-in memory before removing the memory card from the camera.

3.Change the name of the file to one of the following.

Snapshot Image: ENDING.JPG

Movie Image: ENDING.AVI

•You do not need to input the file name extension (JPG or AVI) if your computer is configured to hide file name extensions.

File Name: ENDING

•Your camera is now configured to display a power down image. The power down image will appear any time you press the power button to turn off the camera. The power down image appears regardless of whether or not your camera has a memory card loaded in it.

134