BASIC IMAGE RECORDING
Digital Zoom
Digital zoom is activated after you reach the maximum optical zoom factor (3X). It enlarges the part of the image at the center of the image screen. The range of the digital zoom factor is shown below.
Digital Zoom Factor Range: 3X to 12X
(in combination with optical zoom)
1. | In the REC mode, press [MENU]. |
2. | Use [] and [] to select the “REC” tab. |
5.Slide the zoom
controller towards 
(Telephoto)/ 
to change the zoom factor.
•When zoom reaches maximum optical zoom, it stops momentarily. Keep the zoom
controller pressed to the
(Telephoto)/ 
side and zoom will switch over to digital zoom.
Digital zoom indicator
Zoom indicator
3. | Use [] and [] to select “Digital Zoom”, and |
| then press []. |
4. | Use [] and [] to select “On”, and then |
| press [SET]. |
| • Selecting “Off” disables digital zoom. |
•Switching to digital zoom causes the zoom indicator to appear on the monitor screen. The zoom indicator shows the current approximate zoom factor.
Digital
Optical Zoom 
Zoom 
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1X | 3X |
| 12X | |||
|
| Current zoom factor |
|
| ||
6.Record the image.
62