BASIC IMAGE RECORDING
IMPORTANT! 
•Digital zoom is disabled whenever the monitor screen is turned off (page 32).
•When you perform a digital zoom operation, the camera manipulates the image data to enlarge the center of the image. Unlike optical zoom, an image enlarged with digital zoom appears coarser than the original.
Using the Flash
Perform the following steps to select the flash mode you want to use.
•The approximate effective range of the flash is shown below.
Wide Angle: Approximately 0.6 meters to 2.6 meters (2.0´ to 8.5´)(ISO Sensitivity: Auto)
Telephoto : Approximately 0.6 meters to 2.1 meters (2.0´ to 6.9´)(ISO Sensitivity: Auto)
1.In the REC mode, press [MENU].
2.Press [] (
) to select the flash mode.
•Each press of [] (
) cycles through the flash mode settings described below on the monitor screen.
Flash mode indicator
[ ] ( 
)
63