BASIC IMAGE RECORDING

Flash Unit Status

You can find out the current flash unit status by pressing the shutter button half way and checking the monitor screen and red operation lamp.

The

indicator is also

Red operation lamp*

shown on the monitor

 

screen when the flash

 

unit is ready to fire.

 

* Red operation lamp

When the red operation

It means this:

lamp is this:

 

 

 

Flashing

Flash unit is charging

 

 

Lit

Flash unit is ready to fire

 

 

Changing the Flash Intensity Setting

Perform the following steps to change the flash intensity setting.

1.In the REC mode, press [MENU].

2.Use [] and [] to select the “REC” tab.

3.Use [] and [] to select “Flash Intensity”, and then press [].

4.Use [] and [] to select the setting you want, and then press [SET].

To make flash intensity:

Select this setting:

 

 

Stronger+2

+1

Normal0

–1

Weaker–2

IMPORTANT!

•Flash intensity may not change if the subject is too far or too close to the camera.

65