Getting Started

8. Install receipt/journal paper.

Loading journal paper

The same type of paper (45 mm ⋅ 83 mm i.d.) is used for receipts and journal. Load the new paper before first operating the cash register or when red paper appears from the printer.

REG2 X1

REG1 Z1

OFF X2/Z2

RF

PGM

1

Use a mode key to set the mode switch to REG1 position.

2

Open the printer cover using the printer cover key.

5

Drop the paper roll gently and insert paper to the paper inlet.

3

Cut off the leading end of the paper so it is even.

6

Press the jkey until about 20 cm to 30 cm of paper is fed from the printer.

4

Ensuring the paper is being fed from the bottom of the roll, lower the roll into the space behind the printer.

7

Slide the leading end of the paper into the groove on the spindle of the take- up reel and wind it onto the reel two or three turns.

10