2.Enter the four-digit lock code and press Center Select Key for [OK].

NOTE

The default Lock Code is the last 4 digits of your mobile telephone number.

3.Press Reset Default.

4.Press Center Select Key for [OK] after reading the following warning message, the confirmation message

is displayed : Preference Settings Will be set to

factory defaults. Press Center Select Key for [OK] to continue.

5.Press Navigation Key up or down to select Revert and press Center Select Key for [OK].

A confirmation message is displayed briefly before the phone resets itself.

6.5 System Select

Allows you to set your phone to search or roam for another network when you are not in your home area. Leave this setting as the default unless you want to alter system selection as instructed by your service provider.

1.Press Center Select Key for [MENU], Navigation

Key right 2 times, Phone Settings,

SETTINGS & TOOLS

System Select.

2.Press Navigation Key up or down to select one of the following setting, then press Center Select Key for [OK].

Home Only: Only within your home area or home affiliated area.

Automatic: Scan the radio channels based on the Automatic setting.

6.6 NAM Selection

To select the phone’s NAM (Number Assignment Module) if the phone is registered with multiple service providers:

1.Press Center Select Key for [MENU], Navigation

Key right 2 times, Phone Settings, NAM Selection.

2.Press Navigation Key up or down to select one of the following setting, then press Center Select Key for [OK].

NAM1 / NAM2

A confirmation message is displayed briefly before the phone resets itself.

G’zOne TYPE-S 128

 

G’zOne TYPE-S 129