Storing a Number with Pauses

1.From standby mode, enter the number.

2.Press Right Soft Key [Options].

3.Press Navigation Key up or down to select pause type and press Center Select Key for [OK].

2-Sec Pause / Wait

4.Enter additional number(s) (e.g., pin number or credit card number).

5.Press Left Soft Key [Save].

6.Press Navigation Key up or down to select Create New or Update Existing and press Center Select Key for [OK].

7.Press Navigation Key up or down to select the type of phone number and press Center Select Key for [OK].

8.Enter a name (up to 32 characters) and press Center

Select Key for [SAVE].

A confirmation message is displayed.

Adding a Pause to an Existing Number

1.Press Right Soft Key [Contacts].

2.Press Navigation Key up or down to highlight the

Contacts in Your Phone’s Memory

Contact entry to edit, then press Left Soft Key [Edit].

3.Press Navigation Key up or down to highlight the number.

4.Press Right Soft Key [Options].

5.Press Add Pause.

6.Press Wait or 2-Sec pause.

7.Enter additional number(s) and press Center Select

Key for [SAVE]. A confirmation message is displayed.

Searching Your Phone’s Memory

The G’zOne TYPE-S phone is able to perform a dynamic search of the contents in your phone’s memory. A dynamic search compares entered letters or numbers against the entries in your Contacts. A matching list is displayed in ascending order. You can then select a number from the list to call or edit. There are several ways to search:

•Scrolling Alphabetically

•Searching by Letter

G’zOne TYPE-S 42

 

G’zOne TYPE-S 43