Minuteman UPS MCP-E English, REAR PANEL 120Vac models shown, Installation Placement

English

INSTALLATION

INSTALLATION PLACEMENT

Install the UPS in a temperature controlled environment that is free of conductive contami- nants. Select a location which will provide good air circulation for the UPS at all times. Avoid locations near heating devices, water or excessive humidity, or where the UPS is exposed to direct sunlight. Route power cords so they cannot be walked on or damaged. Operating Temperature: 700VA-5000VA: 0 to 40°C, 7000VA: 0 to 32°C

Storage Temperature: -15 to +45°C	Operating Elevation: 0 to 3,000 Meters
Storage Elevation: 0 to 15,000 Meters	Operating and Storage Relative Humdity: 95%,
non-condensing

REAR PANEL (120Vac models shown)

Tower Models

1.Smart slot for optional cards

2.Switch, momentary switch used to change displays or silence alarm

3.Dip switches used to configure unit parameters

4.Simple Communications port (AS400)

5.RS232 intelligent communications port

6.Network protection (lan only)

7.External battery connection point

8.Output load receptacles

9.Output load circuit breakers

10.Incoming utility power cord

11.Incoming utility circuit breaker

Rackmount Models

1.Incoming utility power cord

2.Incoming utility circuit breaker

3.External battery connection point

4.Network protection (lan only)

5.Smart slot for optional cards

6.Switch, momentary switch used to change displays or silence alarm

7.Dip switches used to configure unit parameters

8.Simple Communications port (AS400)

9.RS232 intelligent communications port

10.Output load circuit breakers

11.Output load receptacles

6