Minuteman UPS MCP-E Configurable Parameters And Settings, English, Function, Factory Default

English

CONFIGURABLE PARAMETERS AND SETTINGS

(These items may require optional software or hardware)

FUNCTION	FACTORY DEFAULT	USER CHOICES	DESCRIPTION
UPS ID	MCP-E SERIES	Up to 64 characters to	Use this function to uniquely identify the
		define the UPS	UPS in your network configuration
Battery installation date	Date of Manufacture	Date of Battery Replacement-	Enter the current date when
		day/month/year (xx/xx/xxxx)	replacing the batteries
Battery life in days	Preset for 1826 days	Enter up to 5 characters	When replacing the batteries,
			calculate the actual number of days in
			use after manufacture date and then
			enter this expected life for your
			environment
Auto Restart:	Enabled	User may Enable or	When "enabled", the UPS will
Enable/Disable		Disable Autorestart	automatically restart and operate in
			normal AC mode after a low battery
			shutdown and normal AC has returned
Set audible	Enabled	User may Enable or Disable	Enabled: The UPS will emit an
alarm state		until Low Battery Warning	audible alarm every 10 seconds
			when in the battery mode.
			Disabled until Low Battery Warning:
			Used when software is controlling the
			UPS or to silence the alarm. In
			this state, the UPS will not emit
			an audible alarm until the unit
			reaches low battery warning level.
Enable or Disable all	Disabled	User is required to enable prior	This is a safety feature to prevent
UPS functions		to operation. The UPS will not	operation while packaged during
		operate until enabled.	shipping.
Set Inverter Output	120 vac on 120 volt units.	120 volt units: 100,110,115,120	Allows the customer to set the voltage
Voltage	230 vac on 230 volt units.	230 volt units: 220,230,240	based on the environment in which the
			unit will be installed. This voltage is
			set via external dip switch. The dip
			switch is on the rear panel of the unit.

26