Confirm Code field. Enter the new four-digit code again as confirmation.

6.Press Center Select Key for [OK].

The following message is displayed to confirm the change has been made : DEVICE CODE SET. If you make a mistake, CODE DOES NOT MATCH will appear on the screen.

6.4.5 Emergency #s

Allows you to enter 3 emergency numbers. You can call these emergency numbers and 911, even when the phone is locked or restricted.

1.Press Center Select Key for [MENU], Navigation

Key right 2 times, Phone Settings, Security.

2.Enter the four-digit lock code and press Center Select Key for [OK].

NOTE

The default Lock Code is the last 4 digits of your mobile telephone number.

3.Press Emergency #s.

4.Select emergency number by pressing Navigation Key

up or down .

SETTINGS & TOOLS

5.Select an emergency phone number then press Center Select Key for [OK].

6.4.6 Erase Contacts

To erase all of your Contacts at once:

1.Press Center Select Key for [MENU], Navigation

Key right 2 times, Phone Settings, Security.

2.Enter the four-digit lock code and press Center Select Key for [OK].

NOTE

The default Lock Code is the last 4 digits of your mobile telephone number.

3.Press Erase Contacts.

NOTE

There is no confirmation message before all of your Contacts are erased. As soon as Erase all is selected, they are gone!

6.4.7 Reset Default

To reset your phone to the factory default settings:

1.Press Center Select Key for [MENU], Navigation

Key right 2 times, Phone Settings, Security.

G’zOne TYPE-S 126

 

G’zOne TYPE-S 127