Troubleshooting
Problem |
| Possible Cause | Action | See page |
|
|
|
| |
A downloaded tone with | Someone may have turned off the | Use the TRANSPOSE/FUNCTION | ||
waveform contains | noise or | keyboard while data was being | button to perform the system reset |
|
keyboard operations become | stored in Flash memory or | operation. If this does not correct |
| |
abnormal when user data is | something else has caused Flash | the problem, contact your nearest |
| |
selected. |
| memory contents to become | authorized CASIO Service Provider |
|
|
| corrupted for some reason. | to request maintenance. |
|
Cannot save data to an SD | 1. The memory card is write- | 1. Adjust the memory card’s write | ||
memory card. |
| protected. | protect switch to enable data |
|
|
|
| storage. |
|
|
| 2. The memory card is not inserted | 2. Correctly insert the memory card | |
|
| correctly into the card slot. | into the card slot. |
|
|
| 3. There is not enough space left on | 3. Use a different memory card or | |
|
| the memory card. | delete files you no longer need |
|
|
|
| from the memory card you are |
|
|
|
| using. |
|
|
| 4. You are trying to use a memory | 4. Use only a memory card of the | |
|
| card whose capacity is not | capacity specified for this |
|
|
| supported by this keyboard. | keyboard. |
|
|
| 5. The memory card is damaged. | 5. Use a different memory card. |
|
Cannot recall data from an SD | 1. The memory card is not inserted | 1. Correctly insert the memory card | ||
memory card. |
| correctly into the card slot. | into the card slot. |
|
|
| 2. There is not enough space | 2. Delete rhythm, SMF, or tone with | |
|
| available in the area into which | wave data currently in the |
|
|
| you are trying to import the data. | keyboard’s Flash memory to |
|
|
|
| make room for the imported data. |
|
|
| 3. You are trying to use a memory | 3. Use only a memory card of the | |
|
| card whose capacity is not | capacity specified for this |
|
|
| supported by this keyboard. | keyboard. |
|
|
| 4. The memory card is damaged. | 4. Use a different memory card. |
|
A tone’s quality and volume | This is an unavoidable result of the digital sampling process,* and does not indicate | |||
sounds slightly | different | malfunction. |
|
|
depending where it is played | * Multiple digital samples are taken for the low range, middle range, and high range of | |||
on the keyboard. |
| the original musical instrument. Because of this, there may be a very slight difference in | ||
|
| tonal quality and volume between sample ranges. |
| |
|
|
|
|
|