Casio WK-3300, WK-3800, WK8000 Using Split, To split the keyboard, Keyboard Settings, 3Select the split tone, and return it to normal, 2Press the SPLIT button, 1 First select the main tone

								Keyboard Settings
Using Split					4 Specify the split point. While holding down the
With split you can assign two different tones (a main tone						SPLIT button, press the keyboard key where you
						want the leftmost key of the high end range to be.
and a split tone) to either end of the keyboard, which lets
						Example: To specify G3 as the split point, press the G3
you play one tone with your left hand and another tone with
								key.
your right hand. For example, you could select GM STRINGS
1 as the main (high range) tone and GM PIZZICATO as the
								G 3
split (low range) tone, putting an entire string ensemble at
your fingertips.
Split also lets you specify the split point, which is the location
on the keyboard where the changeover between the two tones					5 Now try playing something on the keyboard.
occurs.
	NOTE					• Every key from F￿3 and below is assigned the GM
							PIZZICATO tone, while every key from G3 and above
	• Leave the MODE button in the Normal or FULL RANGE						is assigned the GM STRINGS 1 tone.
		CHORD position.			6 Press the SPLIT button again to unsplit the keyboard
SPLIT						and return it to normal.
Example: WK-3300/WK-3800					NOTE
					•	Turning on split switches the currently selected part to
						Part 3, and displays the split tone. At that time, you can
						use the [￿] and [￿] CURSOR buttons to switch between
						parts. Turning off split returns to Part 1.
			Split Tone	Main Tone (GM STRINGS 1)	•	The main tone sounds over Channel 1, while the split
		(GM PIZZICATO)				tone sounds over Channel 3. You can also use the Mixer
						to change the tone and volume settings for these
			Split point
						channels.
					•	Note that split is not possible during record standby or
		To split the keyboard				recording in the Song Memory Mode, or while you are
						using the SMF Player Mode.
1 First select the main tone.					•	When the MODE button is set to CASIO CHORD or
						FINGERED, the accompaniment keyboard range is in
		Example: To select “448 GM STRINGS 1” as the main
						accordance with the split point you specify with the above
			tone, press the TONE button and then use the
						procedure.
			number buttons to input 4, 4 and then 8.

S t r i n g 1 G

2Press the SPLIT button.

Selected split tone Lit

A c o u s B s G

3Select the split tone.

Example: To select “445 GM PIZZICATO” as the split tone, use the number buttons to input 4, 4 and then 5.

P i z z c a t G

E-67