Casio WK-3300, WK-3800, WK8000 Saving User Tones

Synthesizer Mode

Saving User Tones

The group of tone numbers from 700 through 799 (User 001 through User 100) is called the “user area” because they are reserved for storage of user tones. After you recall a preset tone and change its parameters to create your own user tone, you can store it in the user area for later recall. You can recall your tones using the same procedure that you use when selecting a preset tone.

Number	Tone Type
Standard Tone
000-399	Advanced Tones
400-599	Preset Tones
600-619	Drum Sets		Source Tone Select		Parameter Edit
700-799	User Tones*1			Save As Original Tone
		700-799 User Area
800-819	User Tones with Waves*2
900-903	User Drum Sets with Waves*3
Drawbar Organ Tones
000-049	Preset Tones
100-199	User Tones*4

*1: You can select any Advanced Tone, preset tone, or user tone. User tone areas 700 through 799 initially contain the same data as advanced tones 000 through 099.

*2: Area where data transferred from computer is stored (see “Internet Data Expansion System” on page E-82). After transfer, you can use the keyboard to edit parameters, but you can only overwrite existing parameters. You cannot save the data to another number.

*3: Area where data transferred from computer is stored (see “Internet Data Expansion System” on page E-82). Transfer only is allowed, and no parameter editing is allowed.

*4: User tones created by modifying parameters of one of the preset tones (000 to 049). User drawbar organ tone areas initially contain two sets of the same data as drawbar organ tones types 000 through 049.

NOTE

•You can create an original tone using a user tone that includes a waveform (tone number 800 to 819). In this case, the storage area is the same as the source tone area. For example, an original tone created using tone number 800 as a source tone is stored in user area number 800.

E-46