Saving Data

Eject button

WK-3300/WK-3800

WK-8000

SD memory card slot

Inserting and Ejecting a Diskette

The following describes how to insert a diskette into the disk drive and how to eject it.

To insert a diskette into the floppy disk drive

1With the label area of the diskette facing up, insert the diskette shutter first into the disk drive, as shown in the illustration.

2Slide the diskette into the drive as far as it will go, until it clicks into place.

To eject a diskette from the floppy disk drive

IMPORTANT!

Before ejecting a diskette, always check to make sure that the access lamp is not lit or flashing. A lit or flashing access lamp means that the keyboard is performing a data read or write operation. Ejecting a diskette while it is being accessed can cause its data to become corrupted.

1Press the Eject button.This causes the diskette to be partially ejected from the disk drive.2Remove the diskette from the drive by hand.

WK-3800

CURSOR

DISK/CARD

WK-3300/WK-8000

CARD

[+]/[–]

 

YES/NO

Using External Storage Media

This section explains how to use SD memory cards and floppy diskettes (WK-3800 only) for data storage. In this manual, SD memory cards and floppy diskettes are collectively referred to as “external storage media”.

NOTE

Layer, split, and Auto Harmonize are automatically turned off while external storage is being used. Tone and rhythm selection, and rhythm playback are also all disabled.

Basic Memory Card Operation

1Insert the memory card into the card slot.2Enter the Card Mode.*WK-3800Press the DISK/CARD button twice.

This causes the DISK/CARD indicator to appear on the display, and also displays “Card” in the display’s text area.

*WK-3300/WK-8000 Press the CARD button.

• This causes the CARD indicator to appear on the display, and also displays “Card” in the display’s text area.

NOTE

After pressing the DISK/CARD button (WK-3300/WK- 8000: CARD button) once, you can use the [￿] and [￿] CURSOR buttons to select the external storage media.

3Press the [￿] CURSOR button to display the Card Mode menu.

E-87