2. Look up the projector’s IP address.

z Perform the following steps to look up the projector’s current IP address.

1.Press the [MENU] key to display the setup menu.

2.Use the [T] and [S] keys to select “Wired LAN settings” and then press the [ENTER] key.

3.Use the [T] and [S] keys to select “Wired LAN info” and then press the [ENTER] key.

3.On the computer, start up a Web browser.

4.In the Web browser address bar, input the projector’s IP address and then press the [Enter] key.

z If the projectors current IP address is 192.168.100.10, for example, you would input: “http://192.168.100.10”.

z This displays the top page of the projector’s System Admin page.

z For information about what you should do next, see “To control the projector using the Wireless Presentation System control panel” (page 57).

Important!

Under initial default settings, the projector is configured to obtain its IP address automatically from the DHCP server. This means that an IP address will be assigned automatically whenever the projector is connected to a DHCP environment network.

Depending on the network environment being connected to, there may be cases where you will need to assign a projector’s IP address manually. In such cases, you will need to configure projector’s network settings.

If you are unable to display the projector’s System Admin page with your browser using the above procedure, it may mean that there is some problem with your network settings. Refer to the Wireless Function Guide on the CD-ROM that comes with the projector and establish a wireless LAN connection between the projector and your computer. After configuring the projector’s network settings, try performing the above procedure again. For details about the projector’s network settings, see “To configure projector’s network settings and wireless LAN connection settings” in the Wireless Function Guide.

56