2000 Autoflow

INSTALLATION

1.On either side of the master fan/ heater, drill one 3/4” hole even with the fan/heater unit in a val- ley on the bin sidewall.

2.Insert the airswitch probe through the 3/4” hole.

3.Position the housing so the cord exits the housing horizontally, and the vents open downward.

4.Use four self drilling screws to mount the housing to the bin sidewall.

5.Caulk between the housing and the sidewall to seal.

Airswitch

Airswitch mounted on the bin sidewall.

19

Page 19
Image 19
GSI Outdoors 2TAF, 2TFC installation instructions Airswitch