ELECTRICAL POWER SUPPLY
2000 Autoflow
Autoflow to Wet Supply Rotary Switch Interconnect
The 110V AC rotary switch located in the wet storage tank is used to inform the computer on the availability of wet grain. The Wet Supply Rotary Switch use 110V AC to power the motor and 12V DC + to switch a signal back to the computer.
To wire the Wet Supply Rotary Switch to the Autoflow Control Box do the following:
1)Run Four (4) control wires from the Autoflow Control Box to the Wet Supply Rotary Switch.
2)Connect the wires as shown in figure 21.
Figure 21
44
