2000 Autoflow
ELECTRICAL POWER SUPPLY
Autoflow to Storage Chamber Rotary Switch Inerconnect
The 110V AC Rotary switch located in the storage tank is used to inform the computer on the availability of wet grain. The Storage Chamber Rotary Switch is mounted three (3) feet below the fan/heater unit(s). The Storage Chamber Rotary Switch use 110V AC to power the motor and 12V DC + to switch a signal back to the computer.
To wire the Storage Chamber Rotary Switch to the Autoflow Control Box do the following:
1)Run five (5) control wires from the Autoflow Control Box to the Storage Chamber Rotary Switch.
2)Connect the wires as shown in figure 22.
Figure 22
45
