To replace the lamp
Important!
zWhen replacing the lamp, use the special screwdriver that comes with the replacement lamp. The projector does not come with a screwdriver.
1
2 Wait for about 60 minutes to allow the projector’s current lamp to cool down completely.
3 Turn over the projector and place it on top of a desk or on some other stable surface.
4 Loosen the lamp cover screw, and then remove the lamp cover.
6 Pull up on the handle or ribbon to remove the lamp cartridge.
7 Insert the new lamp cartridge as far as it will go, as shown in the illustration.
zAfter inserting the lamp cartridge, stow the ribbon as shown in the illustration in step 5.
Lamp cover
Make sure the grooves of the lamp cartridge align with the grooves of the lamp housing.
5 Loosen the three screws indicated by the marks.
Lamp cartridge
39