Appendix

Connecting to a Component Video Output Device

Some video devices are equipped with a component video output terminal. You can use an optionally available component video cable (YK-3) to connect the COMPUTER terminal of the projector to the component video output terminal of a video device.

Important!

zAlways turn off the projector and the video device before connecting them.

Projector

AV terminal COMPUTER terminal

To component video output terminal

Video device

Optional component video cable (YK-3)

Bundled special AV cable

To AUDIO output terminal

 

White

Red

Yellow

(Not connected)

zYou can use the optional YK-3 component video cable to connect to pin jack (RCA) type component video output terminals. The projector does not support connection to any other type of terminal.

zComponent video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match the colors of the plugs on the optional YK-3 component video cable with the colors of the terminals (Green: Y; Blue: Cb/Pb; Red: Cr/Pr).

zNote that connection only to an analog component video output terminal is supported. Connection to a digital output terminal is not supported.

45