Casio XJ-S43W manual 43

Indicator/Error Message		Description and Required Action
POWER	: Amber flashing	Power has turned off automatically due to a fan problem. Confirm
	Red steady	that the POWER/STANDBY indicator is lit red (without flashing) and
TEMP	: Red steady	that the fan has stopped. After checking the POWER/STANDBY
LAMP	: Red steady	indicator, disconnect the power cord from the projector and wait for
Message	: There is a problem with	all of the projector’s indicators to go out. Next, reconnect the power
	the fan. The projector	cord and turn projector power back on.
	will turn off.	If the error occurs again when you turn power back on, contact your
		retailer or nearest authorized CASIO Service Center.
POWER	: Amber flashing	Power has turned off automatically due to a system problem. After
	Red steady	confirming that the POWER/STANDBY indicator is lit red (without
TEMP	: Red steady	flashing), disconnect the power cord from the projector and wait for
LAMP	: –	all of the projector’s indicators to go out. Next, reconnect the power
Message	: A system problem has	cord and turn the projector back on.
	occurred. The projector	If the error occurs again when you turn power back on, contact your
	will turn off.	retailer or nearest authorized CASIO Service Center.
POWER	: Green steady	A system problem has occurred, which may cause problems with
TEMP	: –	some functions. Turn off the projector, disconnect the power cord
LAMP	: –	from the projector and wait for all of the projector’s indicators to go
Message	: A system problem has	out. Next, reconnect the power cord and turn the projector back on.
	occurred. Normal	If the error occurs again when you turn power back on, contact your
	projection is not	retailer or nearest authorized CASIO Service Center.
	possible.	Press the [ESC] key to clear the warning message.
POWER	: Green steady
TEMP	: –
LAMP	: –
Message	: There is some problem
	with the system.
	The audio function may
	not operate correctly.
POWER	: Green steady
TEMP	: –
LAMP	: –
Message	: There is some problem
	with the system.
	Movies may not play
	back correctly.
POWER	: Green steady	Zoom and focus cannot be performed due to some trouble in the
TEMP	: –	optical drive circuit. Turn off the projector and then turn it back on
LAMP	: –	again.
Message	: Zoom and focus cannot	If the error occurs again when you turn power back on, contact your
	be performed for some	retailer or nearest authorized CASIO Service Center.
	reason. Try turning the	Press the [ESC] key to clear the warning message.
	projector off and then
	back on again.
	If this message
	reappears, request
	servicing.
POWER	: Amber flashing	The projector was turned off automatically due to some problem that
	Red steady	was probably caused by external digital noise or some other reason.
TEMP	: Red steady	Confirm that the POWER/STANDBY indicator is lit red (without
LAMP	: –	flashing). After checking the POWER/STANDBY indicator, disconnect
Message	: –	the power cord from the projector and wait for all of the projector’s
		indicators to go out. Next, reconnect the power cord and turn
		projector power back on.
		If the error occurs again when you turn power back on, contact your
		retailer or nearest authorized CASIO Service Center.

43