ENG
Mounting Batteries
Open the battery cover, and mount four
When they are mounted, the buzzer sounds, and all data is cleared automatically.
Caution If the buzzer does not sound, the orientation of the batteries may not be correct. Check the orientation, and mount the batteries again.
Changing batteries
When the batteries are low, the 
mark lights up. When the 
mark lights up, change the batteries before they become exhausted.
Caution Do not mix old and new batteries, or different types of batteries.
Battery cover
Trying out the GBF PRO RECUMBENT BIKE for the first time
First, ride the GBF PRO RECUMBENT BIKE to familiarize yourself with the machine.
The bike can be used as fitness equipment without connecting it to Playstation 2.
Initial screen
When the batteries are mounted, the initial screen as shown in the figure appears.
Start pedaling slowly.
Training screen 1
1
2
3
4 |
This screen displays your condition that keeps changing during training.
1Indicates the speed during training.
Reference: The SPEED indication can be switched between the pedaling speed (RPM) and riding speed (KM/H or MPH). (refer to “Entering target distance”, page 9.)
2Indicates the current calorie consumption.
When the 
button is pressed, switches the indication to watts.
3Indicates the elapsed time since the start of training.
4 Indicates the riding distance since the start of training.
Training screen 2
Power saving screen
Changing the program
You can change the program by pressing the 
button.
You can choose from the manual mode
For details of each program, refer to “How to Select a Program” on page 10.
Changing the load level
You can change the load level by pressing the |
|
|
| and |
| buttons during training. | ||||
|
|
|
| |||||||
For example, press the |
|
|
| button. You can see that the profile graph goes up higher, and | ||||||
|
|
| ||||||||
feel that the pedaling becomes heavier. |
|
|
|
|
|
| ||||
Reference: In the HR control modes, the load level does not change even when the
and 
buttons are pressed.
When no signals are input for approximately three minutes in any of the screens, the blank power saving screen appears as shown in the figure. The screen previous to the power saving screen appears when you start pedaling again, or press any of the buttons.
8
