Installation and electrical connection
Non rewireable plugs BS 1363 (GB / IRL)
If this machine or appliance is fitted with a
If the socket outlets are not suitable for the plug supplied with this product, it must be cut off and an appropriate plug fitted.
The plug cut from the flexible cord should be disposed of and on no ac- count be inserted into a socket else- where in the house (electric shock ha- zard).
The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is ob- tained. The colour of the correct re- placement cover is that of the coloured insert in the base of the plug, or the col- our that is embossed in words in the base of the plug (as applicable to the design of plug fitted).
The correct fuse rating of the replace- ment fuses that are ASTA approved to BS 1362 should be fitted. Replace- ment fuse covers may be purchased from your local electrical suppliers, or Miele Service Agent.
Do not position the appliance too close to adjacent furniture.
A space of 5 cm (M 636 EG: 10 cm) is required all round the appliance for ventilation.
The microwave oven should be posi- tioned or
When installing a microwave oven care should also be taken that the air can be freely discharged from under and behind the appliance.
Do not place any objects on the ven- tilation outlets or block the space between the appliance floor and the surface upon which it is placed.
The microwave oven can be:
–placed on a worktop
–built under a wall unit in conjunction with a building under frame
(M 616 EG) only.
–built into a wall unit (M 616 EG only) or into a tall unit.
M 636 EC on the other hand can be built under a worktop, with the excep- tion of the stainless steel version.
Use the appropriate building frame and follow the fitting instructions.
The special fitting kit with instructions is available from the Miele specialist dealer or the Domestic Sales Depart- ment.
38
