Warning and Safety instructions
This appliance complies with all rele- vant legal safety requirements. Im- proper use of the appliance can, however, present a risk of both per- sonal injury and material damage. Before installation and before using the appliance for the first time, read the operating instructions carefully. They contain important notes on safety, on the operation and care of the appliance. This way you will avoid the risk of accidents and dam- age to the appliance.
Do not let children access the ap- pliance or its controls. Supervise its use by the elderly or infirm.
Keep these instructions in a safe place and pass them on to any fu- ture user.
Correct usage
The appliance is intended for do- mestic use only: to cook food, and
in particular to defrost,
Technical safety
Do not use the microwave if
–the door is warped.
–the door hinges are loose.
–holes or cracks are visible in the cas- ing, the door, the door seal or the oven interior walls. Switching on with this type of damage could result in micro- waves no longer being contained within the oven, and presenting a ha- zard to the user.
Repairs may only be carried out by suitably competent and qualified ser-
vice technicians trained by Miele to en- sure safety. Repairs and other work by unqualified persons could be dangerous.
Never open the casing of the ap- pliance.
Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock.
If the connection cable is dam- aged the new cable must be fitted
by a Miele service engineer or an auth- orised agent.
Before connecting the appliance to the mains supply make sure that the
rating on the data plate corresponds to the voltage and frequency of the house- hold supply. It is essential that these data correspond as otherwise damage will occur to the machine. If in doubt consult a suitably competent person.
The electrical safety of this ap- pliance can only be guaranteed
when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations. It is most import- ant that this basic safety requirement is tested by a qualified electrician. The manufacturer cannot be held respon- sible for the consequences of an inade- quate earthing system such as electric shock.
6
