5 Installation and connection
5.1 Connecting your USB memory device
Connect your USB memory device, such as iPod®, MP3 player, MP4 player,
USB memory stick, USB card reader, or USB hard drive, to CAVS
You can connect your USB memory device anytime regardless of CAVS
5.2 Removing your USB memory device
You can remove your USB memory device from CAVS
5.3 Remote control battery installation
Before using your remote control, insert the battery as described below.
·Using a clip or fingertip, pull out the battery holder.
·Insert one “CR2032” battery as shown. Make sure to keep the correct polarity (+ or
·Push in the battery holder until a click sound.
͑
G
Battery holder open
Battery insert
Battery holder close
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
13