Spin Speed Selection and Anti-Crease
You should first select the wash programme and then select the wash options
(Changing the programme cancels the preset selected options).
Each selected programme has its own preset spin speed.
Spin speed
• You can reduce the spin speed or remove it completely by pressing the spin
button (Figure 20).
• The spin speed will gradually reduce each time the spin button is pressed at
100 r.p.m. intervals to a minimum of 400 r.p.m (Figure 21).
No spin
• Press the spin button again to get to the no spin option and the display will
show “0” (Figure 22).
• A programme without a final spin is used to prevent creasing when
washing special fabrics.
Anti-crease option
• Pressing the spin button again will select the anti-crease option (Figure 23).
• The wash programme stops on the last rinse, with the clothes left in water.
• When the option is deactivated, the washing machine continues the
programme, draining and spin-drying.
• It is used, for example, when you are not at home and want to delay the
spin drying until you get home, to prevent the clothes creasing after spin-
drying and being left in the drum to be removed.
For added safety, the porthole door does not open immediately at
the end of programme. There is a time delay of approximately two
minutes before you can open the door.
14
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a
Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b
It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c
No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d
Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
SPIN
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a
Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b
It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c
No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d
Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
SPIN
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a
Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b
It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c
No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d
Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
SPIN
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a
Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b
It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c
No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d
Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
SPIN
fig. 20
fig. 21
fig. 22
fig. 23