Wash Programme Phases and Power Cuts
Programme Phases
• When the programme is running, the programme phase and the time
remaining will appear on the display (Figure 30).
• The active phases will appear successively at the top of the display as the
programme progresses (Figure 30). The time remaining until the end of
the programme will also appear on the display. It updates at regular
intervals, but not minute by minute.
• Any option button can be selected provided the wash phase in which it
takes effect has not been passed and when the programme accepts
the option.
• Pressing the time delay button during washing will have no effect on the
wash programme.
• Pressing the Start/Pause button during the wash activates the
PAUSE function.
If the programme is changed on the selector dial during the washing
and drying process, the washer will go onto PAUSE status and the
programme will be cancelled.
If you need to add or remove a garment, press the Start/Stop button
and make sure that the water level is not above the door overflow
level and that the temperature inside is not high. Press the Start/Stop
button again to restart the wash from the same cycle phase it had
stopped at.
Power Cuts
• If there is a power cut, when the electricity comes back on the washing
machine will continue to run from where it left off (it has several hours of
memory).
Warnings and Advice
• Try to wash clothes of different sizes in the same wash programme to
favour the distribution of the clothes inside the drum during spin-drying.
• All the models have a safety system for spin-drying that prevents spin
drying from being carried out if the distribution of the clothes inside
the drum is too concentrated. This prevents the appliance from vibrating
too much.
• If you find that the clothes are not properly wrung out, try spin-drying
them again after having distributed the clothes more evenly in the drum.
17
fig. 30
85
When the programme is running you can see
which phase it is at on the display, as well as
how long there is to the end of the programme.
The active phases will appear successively at
the top of the display as the programme
progresses. The time remaining until the end of
the programme will also appear on the display.
It updates at regular intervals, but not minute by
minute.
Any option button can be selected provided the
wash phase in which it takes effect has not been
passed and when the programme accepts the
option.
Pressing the delay button during the wash has
no effect on the washing machine.
Pressing the start/pause button during the wash
activates the PAUSE function.
7WASH PROGRAMME PHASES AND POWER CUTS
using the appliance
If there is a power cut, when the electricity
comes back on the washing machine will
continue to run from where it left off (it has
several hours of memory). The same will happen
if the ON/OFF button is pressed.
warnings Level the washing machine by adjusting the
feet to reduce the noise caused by spin-drying.
Try and wash clothes of different sizes in the
same wash programme to favour the distribution
of the clothes inside the drum during spin-drying.
PROGRAMME
PHASES
All the models have a safety system for spin-drying
that prevents spin-drying from being carried out if the
distribution of the clothes inside the drum is too
concentrated. This prevents the appliance from
vibrating too much.
If you find that the clothes are not properly wrung out,
try spin-drying them again after having distributed the
clothes more evenly in the drum.
Important
If you change the wash programme during
the wash using the selector, the PAUSE
function is activated and the programme is
cancelled.
If you need to add or remove a garment,
press the start/pause button and make sure
that the water level is not above the door
overflow level and that the temperature
inside is not high. Press the start/pause
button again to restart the wash from the
same cycle phase it had stopped at.
POWER CUTS
POWER CUTS