Starting Up

Start/Pause button

• To start up the washing machine you have to press the Start/Pause button

(Figure 27).

• The time remaining (in minutes) until the end of the programme will

appear on the display at all times.

Lock Function

Lock function selection

• The lock function ensures that the programme will not be affected if any

buttons are pressed. It is used when children could press the buttons, etc.

• The lock function should be activated after the wash programme has been

selected together with all its options.

Activating the lock function

• The lock function is activated by pressing the Start/Pause button and

holding it down for at least 3 seconds (Figure 28).

• The display will show the lock symbol if it is activated.

Deactivating the lock function

• The lock function is cancelled when the wash programme comes to

an end (Figure 29).

• If you want to deactivate the lock function before the end of the

programme, you have to hold the Start/Pause button down again for at

least 3 seconds.

• After 3 seconds, the lock function indicator will disappear from the display,

and it will go into pause status.

• The Start/Pause button does not cancel the lock function.

fig. 27

fig. 29

fig. 28

16
84
Start/pause button
aTo start up the washing machine you
have to press the start / pause button.
The display will constantly show the
minutes left until the wash is over.
6STARTING UP AND
BLOCK FUNCTION SELECTION using the appliance
STARTING UP
Block function selection
The various buttons can be blocked to prevent
them from being pressed and affecting the
selected wash programme and options. This
can be used to stop children playing with the
buttons, etc.
The block function should be activated after
the wash programme has been selected
together with all its options.
Activating the block function
aThe block function is activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
Deactivating the block function
bThe block function is cancelled when
the wash programme comes to an end.
If you want to deactivate the block
function before the end of the
programme, you have to hold the start
button down again for at least 3 seconds .
After 3 seconds, the block function
indicator will disappear from the display,
and it will go into pause status.
The ON/OFF button does not cancel
the block function.
BLOCK FUNCTION
a
b
a
84
Start/pause button
aTo start up the washing machine you
have to press the start / pause button.
The display will constantly show the
minutes left until the wash is over.
6STARTING UP AND
BLOCK FUNCTION SELECTION using the appliance
STARTING UP
Block function selection
The various buttons can be blocked to prevent
them from being pressed and affecting the
selected wash programme and options. This
can be used to stop children playing with the
buttons, etc.
The block function should be activated after
the wash programme has been selected
together with all its options.
Activating the block function
aThe block function is activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
Deactivating the block function
bThe block function is cancelled when
the wash programme comes to an end.
If you want to deactivate the block
function before the end of the
programme, you have to hold the start
button down again for at least 3 seconds .
After 3 seconds, the block function
indicator will disappear from the display,
and it will go into pause status.
The ON/OFF button does not cancel
the block function.
BLOCK FUNCTION
a
b
a
84
Start/pause button
aTo start up the washing machine you
have to press the start / pause button.
The display will constantly show the
minutes left until the wash is over.
6STARTING UP AND
BLOCK FUNCTION SELECTION using the appliance
STARTING UP
Block function selection
The various buttons can be blocked to prevent
them from being pressed and affecting the
selected wash programme and options. This
can be used to stop children playing with the
buttons, etc.
The block function should be activated after
the wash programme has been selected
together with all its options.
Activating the block function
aThe block function is activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
Deactivating the block function
bThe block function is cancelled when
the wash programme comes to an end.
If you want to deactivate the block
function before the end of the
programme, you have to hold the start
button down again for at least 3 seconds .
After 3 seconds, the block function
indicator will disappear from the display,
and it will go into pause status.
The ON/OFF button does not cancel
the block function.
BLOCK FUNCTION
a
b
a