CDA CI240 Before First Use

Before First Use

• When your washing machine has been correctly installed, we recommend

that you pre-clean the machine.

This is to check that the installation, the connections and the drainage are all

correct, and to thoroughly clean the inside of the washing machine before

any wash programmes are run (see the operating instructions on the

following pages).

• Prior to pre-cleaning you should ensure the transit bolts have

been removed.

• Select the normal programme at 60ºC (Figure 9).

• Press the Start/Pause button (Figure 9).

ﬁg. 9

Contents

Main Contents Important Washing Machine Specications Accessories washing machine specifications Warnings Unpacking the Washing Machine Remove the base, corner protectors and top cover (Figure 1). washing machine installation and assembly Do not throw the blocking screws away. You may need to move the washing machine at a later date. a Rem ove the base, corner protectors and top cover. 1 Connecting to the Mains Water Supply Drainage Connection Levelling Electrical Connection Electrical information Before First Use Preparing Garments for Washing Sorting the Clothes Detergents and Additives b Important c eco-note Page Selecting the Wash Programme Eco Note eco-note using the appliance and practical tips Washing Machine Programmes Programme Normal programmesDelicate programmesWool prog.Auxiliary prog. Possible option buttons Page Spin Speed Selection and Anti-Crease Time Delay ba Starting Up g. 29 Lock Function g. 27 g. 28 warnings Maintenance Cleaning the Detergent Dispenser a b washing machine maintenance and cleaning 1 1 MAINTENANCE Cleaning the Filter d CLEANING THE OUTSIDE Important LIMPIEZA EXTERIOR Safety and Troubleshooting Problems