Time Delay

Time delay selection button
• A delay of up to 24 hours can be selected. The delay must be selected after
choosing the wash programme.
• To select the hours of delay, press the time delay button (Figure 24). Each
time the button is pressed the delayed start of washing is increased by
one hour.
Cancelling the delay
• To cancel the delay, press the time delay button repeatedly to cycle
through the full 24-hours, and then press again.
• The delay will be cancelled when 24 hours have been reached and the
button is pressed once more. If the programme is changed the delay is
also cancelled.
Additional functions
Additional function selection button depending on programmes.
• There are 3 options: easy iron, extra rinse and intensive wash.
• Press the button and the desired option will be displayed (Figure 25).
• By pressing the button several times you can choose between several
combinations of one, two and up to three additional functions at the
same time depending on the programme selected (Figure 26).
Option 1: Easy-iron
This option prevents garments from creasing by means of carrying out a
special programme with special turns to fluff out the garments after
spin-drying and make them easier to iron.
Option 2: Extra rinse
Increases the level of the final rinse obtained in the clothes; suitable for large
loads and garments belonging to people with sensitive skin. However, this
option will increase your water consumption.
Option 3: Intensive wash
This option, specially recommended for heavily soiled or stained clothes,
achieves better results by extending the normal wash cycle.
If during the additional function selection, the programme is
changed or the Start/Stop button is pressed, all the functions
selected until then are cancelled.
15
SPIN DELAY TIME SELECTION
EASY IRON
EXTRA RINSE
83
Time delay selection button
A delay of up to 24 hours can be selected.
The delay must be selected after choosing the
wash programme.
To select the delay time, press the clock button.
Each time the button is pressed the start will
be put back 1 hour.
Cancelling the delay
To cancel the delay you have to press the
clock button successively. The delay will be
cancelled when 24 hours have been reached
and the button is pressed once more. If the
programme is changed the delay is also
cancelled.
5TIME DELAY SECTION AND
ADDITIONAL FUNCTIONS using the appliance
Additional function selection button depending
on programmes.
There are 3 options: easy-iron, extra rinse
and intensive wash.
Press the select button to display the
option required.
By pressing the button several times you
can choose between several combinations
of one, two and up to three additional
functions at the same time depending on
the programme selected.
Button: Easy-iron ( )
This option prevents garments from
creasing by means of carrying out a
special programme with special turns to
fluff out the garments after spin-drying
and make them easier to iron.
Button: Extra rinse ( )
Increases the level of the final rinse
obtained in the clothes; suitable for large
loads and garments belonging to people
with sensitive skin. Increases water
consumption!
Button: Intensive wash ( )
This option, specially recommended for
heavily soiled, stained clothes, achieves
better results by extending the normal
wash cycle.
TIME DELAY
ADDITIONAL FUNCTIONS
If during the additional function selection, the
programme is changed or the ON/OFF button
is pressed, all the functions selected until then
are cancelled.
Important
Select
Select
Select
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a
Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b
It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c
No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d
Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
ba
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
83
Time delay selection button
A delay of up to 24 hours can be selected.
The delay must be selected after choosing the
wash programme.
To select the delay time, press the clock button.
Each time the button is pressed the start will
be put back 1 hour.
Cancelling the delay
To cancel the delay you have to press the
clock button successively. The delay will be
cancelled when 24 hours have been reached
and the button is pressed once more. If the
programme is changed the delay is also
cancelled.
5TIME DELAY SECTION AND
ADDITIONAL FUNCTIONS using the appliance
Additional function selection button depending
on programmes.
There are 3 options: easy-iron, extra rinse
and intensive wash.
Press the select button to display the
option required.
By pressing the button several times you
can choose between several combinations
of one, two and up to three additional
functions at the same time depending on
the programme selected.
Button: Easy-iron ( )
This option prevents garments from
creasing by means of carrying out a
special programme with special turns to
fluff out the garments after spin-drying
and make them easier to iron.
Button: Extra rinse ( )
Increases the level of the final rinse
obtained in the clothes; suitable for large
loads and garments belonging to people
with sensitive skin. Increases water
consumption!
Button: Intensive wash ( )
This option, specially recommended for
heavily soiled, stained clothes, achieves
better results by extending the normal
wash cycle.
TIME DELAY
ADDITIONAL FUNCTIONS
If during the additional function selection, the
programme is changed or the ON/OFF button
is pressed, all the functions selected until then
are cancelled.
Important
Select
Select
Select
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a
Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b
It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c
No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d
Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
ba
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
83
Time delay selection button
A delay of up to 24 hours can be selected.
The delay must be selected after choosing the
wash programme.
To select the delay time, press the clock button.
Each time the button is pressed the start will
be put back 1 hour.
Cancelling the delay
To cancel the delay you have to press the
clock button successively. The delay will be
cancelled when 24 hours have been reached
and the button is pressed once more. If the
programme is changed the delay is also
cancelled.
5TIME DELAY SECTION AND
ADDITIONAL FUNCTIONS using the appliance
Additional function selection button depending
on programmes.
There are 3 options: easy-iron, extra rinse
and intensive wash.
Press the select button to display the
option required.
By pressing the button several times you
can choose between several combinations
of one, two and up to three additional
functions at the same time depending on
the programme selected.
Button: Easy-iron ( )
This option prevents garments from
creasing by means of carrying out a
special programme with special turns to
fluff out the garments after spin-drying
and make them easier to iron.
Button: Extra rinse ( )
Increases the level of the final rinse
obtained in the clothes; suitable for large
loads and garments belonging to people
with sensitive skin. Increases water
consumption!
Button: Intensive wash ( )
This option, specially recommended for
heavily soiled, stained clothes, achieves
better results by extending the normal
wash cycle.
TIME DELAY
ADDITIONAL FUNCTIONS
If during the additional function selection, the
programme is changed or the ON/OFF button
is pressed, all the functions selected until then
are cancelled.
Important
Select
Select
Select
82
4SPIN SPEED SELECTION
using the appliance and practical tips
SPIN DRYING
The wash options must always be selected after
choosing the wash programme. Any programme
change during selection cancels the previously
selected options.
a
Spin speed selection and anti-crease
button.
The programme selected is associated
with certain spin revolutions, as shown
on the display.
b
It can be modified by pressing the spin
drying button and the number of
revolutions will be reduced by 100
revolutions at a time to 400.
c
No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d
Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water.
When the function is deactivated, the
washing machine continues the
programme, draining and spin-drying.
It is used, for example, when you are not
at home and want to delay the spin-
drying until you get home, to prevent the
clothes creasing after spin-drying and
being left in the drum to be removed.
b
a
a
Depending on the model, you can open the
hatch by pressing the hatch opening button.
b
If you cannot open the hatch due to a
breakdown or a power cut, proceed as follows:
remove the dispenser by pulling the handle
outwards and pressing the blue lever with your
finger. A button with a slot will appear on the
right. Turn the button to the left with the aid of
a coin and the hatch will open.
If your model of Washing machine does not
have remote opening you have to await about
2 minutes from the end of the programme
before being able to open the hatch.
a
cd
b
OPENING
THE HATCH
fig. 26
fig. 25
fig. 24