CDA HCG 740, HCG 730 installation instructions Location, Tips for installation

Models: HCG 730 HCG 740

1 32
Download 32 pages 50.65 Kb
Page 16
Image 16
Tips for installation

Tips for installation

Location

The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space containing a bath or a shower.

The appliance must not be installed in a bed-sitting room of less than 20 m3.

The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment.

Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.

This hob should only be installed by a qualified installer. Failure to observe this rule leads to cancellation of the guarantee.

The appliance must be installed correctly, in compliance with the regulations in force and following the manufacturer's instructions.

Any repair or maintenance must be performed with the appliance switched off.

These appliances have been designed and manufactured to be fitted into heat-resis- tant units.

These hobs are designed to be fitted into 600 mm deep kitchen units.

The unit walls must not be higher than the working surface and must withstand a temperature of 75°C more than room temperature.

Avoid installation near inflammable materials (e.g. curtains).

16

Page 16
Image 16
CDA HCG 740, HCG 730 installation instructions Location, Tips for installation