BURNERS AND GRIDS
✓These parts can be removed and cleaned with appropriate products.
✓After cleaning, the burners and their flame spreaders must be well dried and correct- ly replaced.
✓It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.
✓In appliances with electric ignition, check that the electrode “S” (fig. 7) is always clean to ensure
✓In the models with safety device, check that the probe “T” (fig. 7) next to each burn- er is always clean to ensure correct operation of the safety valves.
✓Both the probe and ignition plug must be very carefully cleaned.
✓Note: To avoid damage to the electric ignition do not use it when the burners are not in place.
GAS TAPS
✓Regular lubrication of the gas taps must only be performed by specialised engineers.
✓If the gas taps are not working properly call the
CONTROL KNOBS
✓The control knobs may be removed for cleaning but care should be taken not to damage the seal.
13
