FASTENING THE INSTALLA- TION BRACKETS
Each cooktop is provided with an instal- lation kit including brackets and screws for fastening the top to fixture panels from 2 to 4 cm thick.
✓Turn the cooktop upside down and fasten the brackets “F and R” to the appropriate socket holes, without tightening the screws “B” for the moment.
✓Make sure that the brackets are fas- tened as shown in figures 16a, 16b and 16c.
FASTENING THE COOKTOP
✓Insert the cooktop into the hole and position it correctly.
✓Adjust the position of the brackets “F and R” and tighten screws “B” to block the cooktop firmly in position.
✓With a sharp cutter or trimmer knife trim the excess sealing material around the edge of the cooktop.
Take care not to damage the work- bench.
Figures 16
R
R
fig. 16a
| F | |
| F | |
Rear side | Front side | |
seal C | seal A | |
seal A | ||
|
20 mm min.
40 mm max.
B |
R |
B |
F |
20 mm min.
40 mm max.
fig. 16b | fig. 16c | 19 |
|
|