CDA RC9321 manual Left and Right Ovens, Regulating of the oven minimum

LEFT and RIGHT OVENS

Regulating of the oven minimum

Considering that in the minimum position the flame must have a length of about 4

mmand must remain lit even with a brusque passage from the maximum position to that of minimum.

To be effected only for the oven burner (as the grill burner has an only fixed input) operating on the thermostat as follows:

–light the oven taking the knob to Max. position.

–remove the knob and by a thin screwdriver (3 mm section - 100 mm long) unscrew of about a half turn the screw by-pass, passing through the front panel hole (fig. 58)

–fit the knob and let the oven heat for 10 minutes, then take the knob to position 130 allowing the thermostat to work under by-pass.

–after further removal of the knob, stop slowly the screw by-pass G (being careful not to turn the knob rod) until the flame reaches 3-4 mm high.

N.B. For LPG the by-pass screw must be fixed thoroughly.

Flame correct

Flame faulty in primary air

Flame with excess primary air

G

Fig. 58

44