Locate the Declination cable and plug one end of the cable into the port on the electronics panel labeled DEC Port and plug the other end of the cable into the port located on the declination motor drive (see Fig
Powering the Telescope
The Advanced GT can be powered by the supplied car battery adapter or optional 12v AC adapter. Use only adapters supplied by Celestron. Using any other adapter may damage the electronics or cause the telescope not to operate properly, and will void your manufacturer's warranty.
1.To power the telescope with the car battery adapter (or 12v AC adapter), simply plug the round post into the 12v outlet on the electronic panel and plug the other end into your cars cigarette lighter outlet or portable power supply (see Optional Accessories). Note: to prevent the power cord from being accidentally pulled out, wrap the power cord around the strain relief located below the power switch.
2.Turn on the power to the telescope by flipping the switch, located on the electronics panel, to the "On" position.
DEC Locking
Clamp
R.A. Locking
ClampDeclination Cable
Input Port
Declination Cable
Output Port
12v Power Input
On/Off Switch
Figure
14