Assembly Step 2 - Attach Legs to X-Frames
Tools Needed:
Phillips head screwdriver
USE HARDWARE ”A”
A M6x15mm | B M6 Flat |
Bolt (8) | Washer (8) |
1.Attach the leg to the
2.Line up the bolt holes on the side of each leg and insert a bolt into each of the bolt holes.
3.Tighten the bolts securely.
4.Repeat steps 1 through 3 above for each leg and frame. Be sure to match the correct leg component to its corresponding side, left/right.
When these steps are complete, you will have 2 sets of frames with legs attached.
LOCATE THESE PARTS:
| |
with |
|
Control |
|
Panel |
|
2Left Legs
2 Right
Legs
B
A
11
