Assembly Step 8 - Ignitor Installation
1. Locate the loose end of the ignitor wire. Connect it to the ignitor electrode underneath the grill tub, between the two burner tubes.
2. Using the remaining bolt and nut from Step 5 (page 14), bolt the hose bracket to the frame.
Be sure the bolt mounts through the modesty panel tabs and the frame leg.
Securely tighten the bolt and nut using a phillips head screwdriver and 7mm wrench.
Installing the Battery
1.Unscrew the cap from the ignitor button.
2.Insert an AA battery (from the hardware pack) The positive end of the battery faces out.
3.Place the button spring and cap back onto the ignitor and thread it back on.
Test the ignitor: Make sure gas is off or disconnected. Press the ignitor button and check for a spark in the grill tub and the side burner.
17
