CFM Corporation A053041 owner manual Assembly Attach the Feet

Assembly Step 3 - Attach the Feet

Tools Needed:

Phillips head screwdriver

17mm Wrench

USE HARDWARE ”B”

A	B	C	D
Wheel	M10 Axle	M6x15mm	M6 Flat
Washer(2)	Nut (2)	Bolt (8)	Washer (8)

1.Assemble the wheels and axle to the tank-side foot as shown above right. Insert the axle through the foot, one wheel on each end, tighten one nut and wheel washer on each end, and snap the hub caps onto the wheels

2.Attach each foot to the bottom of the frame assemblies as shown. The legs will snap into the feet.

Be sure the wheeled foot is on the left side of the assembly as shown.

3.For each mounting location, insert 2 bolts with washers as shown.

4.Once all of the bolts are securely tightened, position the assembly so that the wheels are on your left side as you face it. (This is the front)

LOCATE THESE PARTS:
		Left Foot	Wheel
		(tank side)
	A
	Wheel
B	Washer
Axle
Nut
			Axle
Hub			Right Foot
Cap

C

D

LEFT

FOOT

12