![](/images/new-backgrounds/1150834/15083425x1.webp)
Assembly Step 5 - Attach the Modesty Panel
Tools Needed:
Phillips head screwdriver
| 7mm Wrench |
USE HARDWARE ”D” |
|
| B |
A M4 KEPS | M4x15mm |
Nut (6) | Bolt (6) |
LOCATE THESE PARTS:
Tank
Heat
Shield
Modesty
Panel
1.Position the modesty panel between the front legs of the assembly. Align the mounting tabs with the bolt holes in the legs.
From the back side of the assembly, insert the
2.M4 bolts through each of the mounting holes and thread on the M4 KEPS nuts. DO NOT
yet insert the bolt indicated - it will be installed during a later assembly step.
A
B
IMPORTANT! The Tank Heat Shield must be properly installed to provide an additional precautionary safeguard.
3.Position the Tank Heat Shield between the front and rear
BA
4.For each mounting hole, insert M4 bolts and thread on M4 KEPS nuts.
5.Securely tighten all the bolts. Remember to set aside the remaining bolt and nut for a later step.
14