Assembly Step 13 - Attaching the L.P. Gas Cylinder
LOCATE THESE PARTS:
L.P. Gas Cylinder
(NOT INCLUDED)
1.Lift the tank retainer wire up.
2.Set the L.P. Gas Cylinder onto the left foot of the grill, resting it in the grooves.
In order to use your new grill immediately, have your L.P. Gas Cylinder filled prior to assembly.
3.Lower the tank retainer wire down around the L.P. Gas Cylinder. Snap it snugly around the tank.
4.Attach the regulator to the L.P. Gas Cylinder valve.
Refer to the following page for important L.P. Gas Cylinder connection information.
Tighten
22
