2
Figure 1. Electrical Timing and Output Characteristics
1.2.4 Environmental
The environmental specifications of the module are:
Operating Temperature: 0C to +50C
Storage Temperature: -40C to +65C
Humidity: <95% without condensation
Pulse Repetition Interval
Range: 50ns to 1 sec, in 6 r anges
Resolution: 25n s min., 10 bits
Accuracy: (1%+15ns) of the programmed value
Pulse Width
Range: 25ns to 1sec, in 6 ra nges
Resolution: 25n s min., 10 bits
Accuracy: (1%+15ns) of the programmed value
Delay Timing (from Tri gger Out)
Range: 25ns to 1 sec, range slaved to Pulse
Repetition Interval range
Resolution: 25n s min., 10 bits
Accuracy: (1%+15ns) of the programmed value +
25ns to 75ns synchronization time
Pulse Output
Impedance: 2-5 ohms (max. load 50 ohms) or
50 ohms selectable.
Amplitude: 10V (no load, <10 MHz) (low impedance)
+5V into 50 ohms (50 Ohm impedance)
Accuracy: 4% of the programmed value plus
100mv offset error (no load)
Resolution 12 bit, 4.9mV (no load)
Transition Time: Fixed rate, 5ns at 5V (typical)
Trigger/Gate
Trigger Output: TTL, 10 gate drive capability
Trigger/Gate In: TTL