Chamberlain 1000SDR 1/3 HP, 2000SDR 1/2 HP SECURITY, Model 59LM, Model 88SD, Model 97LM, Model 98LM, Model 971LM, Model 972LM, Model 973LM, Model 974LM, Model 970LM, Model 1702LM, 3-ChannelMini

Accessories Available For Your Opener

Model 1702LM	Outside Quick Release	Model 971LM	SECURITY✚ Single-Function
	Required for a garage with NO access		Remote Control
	door. Enables homeowner to open		Includes visor clip.
	garage door manually from outside by
	disengaging trolley.
Model 59LM	Outside Keylock	Model 972LM	SECURITY✚ 2-Channel
	Operates the garage door automatically		Remote Control
			Includes visor clip.
	from outside when remote control is
	not handy.
Model 88SD	8 foot Complete Rail	Model 973LM	SECURITY✚ 3-Channel
	To allow an 8 foot door to open fully.		Remote Control
			Includes visor clip.
Model 97LM	Extension Brackets	Model 974LM	SECURITY✚ 4-Channel
	(Optional) For safety sensor		Remote Control
	installation onto the wall or floor.		Includes visor clip.

Model 98LM	Passive Infrared Control Console	Model 970LM	SECURITY	✚
				3-Channel Mini
	Multi-function door control with motion		Remote Control
			With key ring and Velco fastening
	sensor that automatically turns opener
	lights on for 5 minutes when it detects a		strip.
	person entering the garage. Sensor can be
	easily deactivated when desired.

Model 976LM SECURITY✚ Keyless Entry

Enables homeowner to operate garage door opener from outside by entering code on specially designed keyboard. Also can add a temporary pass code for visitors or service persons. This temporary code can be limited to a programmable number of hours or entries.

To Add the Keyless Entry

We recommend that you program your code before you install the Keyless Entry. You will not need assistance, and you can test the reception at the mounting location before installation.

1.Choose a 4-digit code using numbers from 0 to 9

(a number can be used more than once, for example, 4, 0, 4, 1).

2.Press the four buttons for the code, then press and hold the Enter button. The indicator light on the door opener panel will blink.

3.Press and release the “Smart” (learn) button on the opener panel. After the opener lights flash, release the Enter button.

Test by pressing the the code, then press Enter. The door should begin to move.

You may also program the Keyless Entry from the Multi-Function Door Control, as follows:

1.With the door closed, enter the four digit code desired, then press and hold Enter.

2.Press and hold the light button on the door control.

3.Press and hold the door control push bar.

4.After the opener lights flash, release all buttons.

34