Care of Your Opener

LIMIT AND FORCE ADJUSTMENTS:

Weather conditions may

FORCE CONTROLS

cause some minor changes

 

in door operation requiring

 

some re-adjustments,

 

particularly during the first

 

year of operation.

 

Pages 23 and 24 refer to the limit and force adjustments. Only a screwdriver is required. Follow the instructions carefully.

Repeat the safety reverse test (Adjustment Step 3, page 25) after any adjustment of limits or force.

MAINTENANCE SCHEDULE

Every Month

Manually operate door. If it is unbalanced or binding, call a trained door systems technician.

Check to be sure door opens & closes fully. Adjust limits and/or force if necessary. See pages 23 and 24.

Repeat the safety reverse test. Make any necessary adjustments. See Adjustment Step 3.

Every Year

Oil door rollers, bearings and hinges. The opener does not require additional lubrication. Do not grease the door tracks.

THE REMOTE CONTROL BATTERY

To prevent possible SERIOUS INJURY or DEATH:

NEVER allow small children near batteries.

If battery is swallowed, immediately notify doctor.

To reduce risk of fire, explosion or chemical burn:

Replace ONLY with 3V2032 coin batteries.

DO NOT recharge, disassemble, heat above 100° C (212° F) or incinerate.

The lithium battery should produce power for up

to 5 years. To replace battery, use the visor clip or screwdriver blade to pry open the case as shown. Insert battery positive side up (+). Dispose of old battery properly.

Replace the battery with only 3V2032 coin cell batteries.

Battery positive side up (+)

NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

28