Chang Yue Industrial KN-8828B, KN-8828P ROASTING WITH A PROGRAM

ROASTING WITH A PROGRAM - KN- 8828P

Select a Program with which to roast as described on the previous page. If you

have not yet created any additional Programs use “Program 0” which is the default

Program when entering Program mode. After Selecting a program, begin the roasting

process by pressing the green POWER-START button.

In the display’s Message Center you will now see “Preheat.” The ther-

mometer icon next to the digital temperature display is ﬂ ashing. The roaster

is warming, coming up to temperature. The amount of ti me it takes to pre-

heat varies depending on the such factors as the ambient air temperature and

whether it has recently been used.

When it is time to add the beans, the machine will beep and the Mes-

sage Center w ill display the “Add Beans” a nimation and the roast begins.

Pour the beans into the roaster and the roast will begin.

After the “Add Beans” animation ends the Message Center displays

“Roasting.” The roaster can progress through the Program on its own. The

main Time Display counts down from the total amount of t ime in the se-

lected Program. The Temperature display shows the current temperature in

the roasting chamber.

While the roast is in progress, if at any time the temperature

display reaches 414 F., a safety feature will alert the user by beeping

a warning. If the user does not press ENTER within 30 seconds

the beans will be ejected..

You can tell that this segment is currently active b ecause, as seen here, the ﬁ rst

three time-squares are now displayed, and the third is blinking showing that in this

instance that the third-quarter of this segment’s programmed time is active.

The eight Segments of the P rogram Display show a lot of important in forma-

tion. In the temperature area of t he Segment shown here you ca n see that some of the

bars are displayed and some are not.

The single bar above the Segment indicates the programmed temperature goal

for this segment

The space between t he single bar and the lower portion of the Segment’s dis-

play graphically represents how close the actual temperature is to reaching the goal

of the programmed temperature.

NOTE: It is possible for the roaster to not reach the programmed temperature goal for any

particular segment. That does not necessarily indicate that there is a problem.

“Roasting.” The roaster can progress through the Program on its own. The

main Time Display counts down from the total amount of t ime in the se-

lected Program. The Temperature display shows the current temperature in

the roasting chamber.

Chang Yue Industrial KN-8828B, KN-8828P ROASTING WITH A PROGRAM - KN- 8828P