30
Modifying a KN- 8828P Program Enter the “Program” mode a nd select the Program to be modifi ed as descr ibed earlier. Press “SET/
SAVE.” The “SET/SAVE” button turns green signifying that you are in the setting mode to change param-
eters for the selected Program. You have entered the area of t he fl ow chart above that is indicated inside
the blue rectangle.
TEMPERATURE
When you enter the setting mode the KN-8828P defaults to Segment 1 and “Temperature.” You will
notice that the all the bars of Segment 1 are displayed and a temperature bar signifying the current selected
temperature for Segment 1 is blinki ng and the digital temperature display is blinking. Using the “+” and
“-” buttons you can now adjust the temperature for Segment 1 as desired.
For any given adjustment, the “+” or the “-” buttons may or may not be illuminated. If a button is not
illuminated it signifi es that you have reached the limit for that portion of the range for that specifi c function
in that Segment. For example, if you have selected the highest programmed temperature for Segment 1,
then the “+” button will no longer be illumi nated. When you have completed adjusting the Temperature
for Segment 1, move on to the next adjustment in Profi le 1 by pressing “ENTER.”
FAN
The Fan icon is now blinking and you can adjust fan speed for Segment 1 using the “+” and “-” but-
tons. Adjust the fan speed as you desire, and then press “Enter’ to move on.
Any P rogram (except
Program 0) can be modifi ed.
Modifi cation can be anything
from changing a single entry
(such as “Temperature” for
“Segment 3”) to creating an
entire program from scratch.
The process described be-
low is illustrated in this fl ow
chart: