Attaching the hitcharm to the
CTS Ready Chassis
The hitcharm is attached to the CTS Ready Chassis into the left “VersaWing 2.0” bracket.
The hitcharm must always be attached into the
The hitcharm should now protrude about 2 cm / 3/4 inch out of the rear side of the VersaWing 2.0, and the rear vertical holes in the VersaWing 2.0 and hitcharm must align with each other.
Press down the small button and slide the hitcharm into the VersaWing 2.0 until the large button engages in the VersaWing 2.0 (Figures 1 to 3).
Insert the security pin into the rear vertical hole of the VersaWing 2.0 and push it down completely through the hitcharm until the retaining ring is touching the top of the VersaWing 2.0.
DANGER
The security pin must always be inserted, in addition to the large spring button in the bicycle hitcharm! A hitcharm that has not been secured properly may come loose during travel, with serious consequences for your child, possibly even fatal injuries.
20
