Chariot Carriers Corsaire XL, Captain XL manual Assembly

Assembly

Push the wheel arms, with the bend toward the centre of the carrier and wheel dropouts pointing downwards, into each VersaWing 2.0.

The wheel arm should nowprotrude about 2 cm / 3/4 inch out of the rear side of the VersaWing 2.0.

Press the small button in for each and push the wheel arms into the VersaWing 2.0 until the large button engages

(Figures 1 to 3).

DANGER

Make sure that the wheel arms are correctly attached to the carrier. Incorrect attachment may lead to loss of the front wheel during travel and this may lead to an accident.

Guide the quick-release axle through the wheel axle and screw on the nut. Both skewer springs must be located on each side so that the narrow side points towards the centre of the hub.

27